LOCKSTEP
SYSTEMS
Matchmark

Matchmark Pack Verification

Coding and verification for packaging lines

Every pack code, matched to its record.

Matchmark is line-side software. It composes each pack’s code, sends it to your coder, records what your vision system read, and keeps one record for every pack it expects, including packs with no recorded read.

01How it works

One pack, from line to record.

Follow a single carton through an illustrated line built from generic equipment. Each device contributes one fact. Matchmark keeps them together in one record.

  1. A plain taped kraft carton rides a dark belt conveyor in a pale grey studio.
    01 / Follow

    Follow one pack.

    One carton, sample ID 000418, enters an illustrated line. Watch what each device contributes and what Matchmark keeps.

  2. The carton sits fully on a short, separate belt section with a narrow gap at each end and a stainless base.
    02 / Weigh

    Weigh.

    The carton rides an isolated belt section. In this example, the checkweigher supplies the measured weight.

  3. A cartridge thermal inkjet head, bolted beside the belt, prints a code on the passing carton face across a small air gap.
    03 / Compose and print

    Compose and print.

    Matchmark supplies the intended code. The thermal inkjet coder prints it on the passing face.

  4. Close view of the kraft face with the printed code MM 000418.
    04 / The mark

    MM 000418

  5. Downstream, a vision head with a round lens and a separate white bar light face the same printed patch.
    05 / Read

    Read.

    Downstream, the vision system reads the same face under its own white light. It supplies the read. Matchmark records it.

  6. The marked carton continues along the belt, left of centre, with open space to its right.
    06 / Match

    Match the record.

    The read joins the record for pack 000418: intended code, measured weight, coder acknowledgement and vision read, side by side. Try the three examples below.

Illustrative sequence and synthetic records.

One record, three examples.

Matchmark does not decide pass or fail. The checkweigher and the vision system make those calls with their own logic and calibration, and Matchmark records each verdict against the pack’s intended code. It also flags a pack that was expected but never reached the vision system. A coder acknowledgement shows the code was accepted for printing; only the vision read is an observation of the pack.

PassPack 000418

Example record
Product
Sample product A
Measured weight
2.41 kg
Weight check
Pass from the checkweigher
Intended code
MM 000418
Coder
Code acknowledged
Vision read
MM 000418
Vision verdict
Good from the vision system
Result
Pass

Both devices passed the pack. The vision read matches the intended code.

Vision failPack 000418

Example record
Product
Sample product A
Measured weight
2.41 kg
Weight check
Pass from the checkweigher
Intended code
MM 000418 (differs)
Coder
Code acknowledged
Vision read
MM 000419 (differs)
Vision verdict
No-good from the vision system
Result
Vision fail

The vision system judged the print no-good. Matchmark records its verdict beside the intended code: the final digit differs.

Missing packPack 000418

Example record
Product
Sample product A
Measured weight
2.41 kg
Weight check
Pass from the checkweigher
Intended code
MM 000418
Coder
Code acknowledged
Vision read
No read recorded
Vision verdict
None received
Result
No read recorded

Expected pack record remains, flagged by Matchmark: scanned and printed, but never seen by the vision system.

Illustrative sequence and synthetic records. The record does not say where a pack went; it shows only what was intended, acknowledged and read.

Named after match marks.

Engineers scribe match marks across two mating parts so they go back together in exactly the right position. Matchmark does the same for each pack: the code printed on it has to line up with the record made for it. A wrong code, a duplicate or an expected pack with no read breaks the match, and Matchmark logs it.

Line flow: scan, weigh, compose code, print, inspect, record. Matchmark composes each code and keeps one record per pack. MATCHMARK · ONE RECORD PER PACK SCAN WEIGH COMPOSE PRINT CONFIRM INSPECT RECORD identifyproductcheckweigherdate · shiftno. · weightcoder printsecho matchesintentvision readsthe codematch · logreport
Illustrative flow. Stations and their order vary by line; each integration is confirmed on your equipment during discovery.

What It Does

Matchmark does the work between your devices: deciding what each code says, keeping the printer in step with the line, and keeping evidence for every pack.

Composes Every Code

  • Consume-before dates from your shelf-life rules
  • Shift codes, sequence numbers and measured weight
  • Recipes per product, for single, scheduled or random product mixes

Keeps the Printer in Step

  • Sends each code ahead of its pack
  • Checks what the printer reports against what was intended
  • Never resends blindly after a lost reply; it reconciles first

Records Every Inspection

  • Stores the vision system’s result for each pack
  • Matches it to its record by the number printed on it
  • Logs duplicates, and expected packs with no recorded read

Operator Screens

  • Live overview, line statistics and equipment status
  • Operator, supervisor and QA access levels
  • Reject history, kept apart from a counter reset

Records and Reports

  • Multi-year records on the line PC, with automatic backup
  • Spreadsheet exports for QA and audits
  • Reprints from the stored record, never re-invented

Runs on Site

  • Runs on an industrial PC at the line
  • No internet on the production path
  • Office access is an option, over your own network

Designed to Connect To

Matchmark talks to each device through the interface its maker documents. We identify your exact models and firmware first, and test every connection on your equipment before installation.

Thermal inkjet and other coders
Checkweighers
Vision controllers with OCR
Fixed barcode scanners

The illustrated line uses generic equipment. Specific integrations are confirmed case by case.

Matchmark supplies the codes and keeps the evidence. Reject timing, interlocks and machine safety stay with the machine controls. Matchmark does not drive motors.

MMWalkthrough

See a simulated line run through Matchmark.

Email
hello@lockstepsystems.coThis address is not active yet.
Format
Screen-shared walkthrough, about 30 minutesThe walkthrough uses a simulation with synthetic products, not your line.